Neutral Silicone Sealant, Structural Weather-Resistant Curtain Wall Adhesive, Waterproof and Mildew-Proof Adhesive.

• Customization: Available
• CAS No.: 63148-60-7
• Formula: Ho-Si(CH3)2o[Si(CH3)2o]Nsi(CH3)2-Oh
• Model NO.: ZS5000
• Bonding Function: High Temperature Resistant Adhesive
• Morphology: Paste
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Rubber
• Characteristic: Waterproof
• Promoter Composition: Tackifier
• Composition: Organic Material
• Color: Custome
• Model No.: Zs5000
• OEM: Accept
• Cetificate: ISO9001, ISO14001
• MOQ: 240
• Component: One Component Silicone Sealant
• Shelf Life: 12 Months
• Usage Temperature: +5ºC~+35ºC
• Working Temperature: -40ºC~+150ºC
• Usage 1: Glass Curtain Wall, Stone, Mirrow, Aluminum Plasti
• Free Sample: Yes, But We Do Not Bear The Courier Costs.
• Quality Guaranteed Period: 15 Years and Above
• Transport Package: 24 Cartridges/20 Sausages
• Specification: 600ml
• Trademark: ZS
• Origin: China
• HS Code: 3506100010
• Production Capacity: 100000/Month

Product Description

 

Product Description

 

Product Feature

1. Single component, easy to use, good extrudability and thixotropy in the temperature range of 4°C ~ 40°C, can be applied
directly by using a glue gun;
2. After curing, it will not become brittle, harden or crack at low temperatures of -30°C. It will not soften or degrade at high
temperatures, but will shrink to a certain extent and increase in hardness;
3. Excellent weathering resistance, aging, UV, ozone and water resistance;
4. Excellent resistance to high and low temperatures, will not become brittle, hardened or cracked at -30°C after curing, and will
not become soft and degraded at high temperatures, but there is a certain shrinkage, and the hardness has increased;
5. Good adhesion, forming a strong seal with most building materials when cured without the need for a primer;
6. Good compatibility with other neutral silicone adhesive
 

Instructions for use

1.Before construction, the glass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.3.Adjustment should be completed within ten minutes after dispensing
4.The product room temperature curing, surface drying time: 45Min, full curing time: 24h
5.Application temperature range: -40ºC-+100ºC..

Storage

1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.

Our product

other product

product

unit

Result

Result

appearance

clear,whit

clear

specific gravity uncured

1.08,1.56

1.08

viscosity at 120ºC(248ºF)

pas

>60

>60

Nonvolatile content

wt%

≥97.5

≥98.5

Open time2

minutes

20

15

Cure time, 3 mm bead³

days

<2

<2