| Customization: | Available |
|---|---|
| CAS No.: | 63148-60-7 |
| Formula: | Ho-Si(CH3)2o[Si(CH3)2o]Nsi(CH3)2-Oh |
|
Still deciding? Get samples of US$ 0.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Other product | Other product | ||
| Property | Unit | Result | Result |
| appearance | clear,white | clear | |
| Uncured specific gravity | pas | 1.08,1.56 | 1.08 |
| Viscosity at 120°C (248°F) | wt% | >60 | >60 |
| Nonvolatile content | minutes | ≥97.5 | ≥98.5 |
| Open time2 | days | 20 | 15 |
| Cure time, 3 mm bead³ | <2 | <2 | |
| Hardness - durometer Shore A | psi | 55-65 | 55-65 |
| Ultimate tensile strength | >600 | >600 | |
| Ultimate elongation | % | >1200 | >1200 |
| Adhesion-in-peel strength | pli | >30 | >30 |
| Service temperature range | ºC(ºF) | -50 to 150 (-58 to 302) | -50 to 150 (-58 to 302) |
| Shear adhesion failure temperature | ºC(ºF) | > 300 (> 572) |
> 300 (> 572) |
Product Feature
1. Single component, easy to use, good extrudability and thixotropy in the temperature range of 4°C ~ 40°C, can be applied
directly by using a glue gun;
2. After curing, it will not become brittle, harden or crack at low temperatures of -30°C. It will not soften or degrade at high
temperatures, but will shrink to a certain extent and increase in hardness;
3. Excellent weathering resistance, aging, UV, ozone and water resistance;
4. Excellent resistance to high and low temperatures, will not become brittle, hardened or cracked at -30°C after curing, and will
not become soft and degraded at high temperatures, but there is a certain shrinkage, and the hardness has increased;
5. Good adhesion, forming a strong seal with most building materials when cured without the need for a primer;
6. Good compatibility with other neutral silicone adhesive
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.
){kind=link}